← Back to articles

SYSPRO ERP

Who can help with inventory planning in SYSPRO? Four routes, and what good help looks like

19 November 2026

Who can help with inventory planning in SYSPRO? Four routes, and what good help looks like

Who can help us with inventory planning in SYSPRO?

It's a good question, and it has more than one good answer. Some businesses build the skill in-house, some lean on their SYSPRO partner, some use an outside planning service and some add software. Many combine two or more of these.

Before choosing, it helps to know what the work involves and how much of it SYSPRO already does. (We've written separately about the cost of stockouts and overstocks.)

What inventory planning involves, month to month

Three terms tend to get used as one, though each covers a different part of the job. Demand forecasting is the estimate of how much of each item customers are likely to want, and when. Demand planning is the conversation around that estimate, where sales and customer knowledge is added and the business agrees the number it will plan to. Inventory planning turns that agreed number into stock decisions: how much to hold, where to hold it, and when and how much to reorder.

In practice, a planning month follows a steady rhythm. It starts with the inputs (stock balances, open orders, sales history and supplier lead times), because every later decision rests on them. The planner then compares last month's forecast with what actually sold, looking for the items where it keeps running high or low, since a forecast that is always a little optimistic builds stock month after month. With that picture in hand, the items can be sorted into the few that deserve close attention and the many that can run on well-set rules.

The rest of the month is about acting on what that shows. Where an item's demand or supply has changed, its settings get a fresh look: safety stock, reorder point, minimum and maximum levels and lead time. In between, the exceptions arrive, the shortages, late deliveries and surplus stock that each need a decision to expedite, move, delay or cancel. And the month closes by taking the risks and decisions to the purchasing and production meetings, so the plan becomes orders.

Lead times deserve particular attention in South Africa at the moment. The Bureau for Economic Research's Absa PMI for October 2026 names delays at the Durban harbour as "a key factor in keeping delivery times elevated", with some manufacturers reporting shortages of imported inputs and interruptions to production. The survey covers manufacturers in general rather than your own suppliers, but it's a good reason to check that the lead times in your system still match what your suppliers deliver today.

What SYSPRO already does for inventory planning

SYSPRO already carries much of this work. Its inventory planning forecasts demand for each item from its sales history, picking the forecasting method that fits each one best, and sets minimum and maximum stock levels per item or per warehouse, either from fixed rules or from the service level you want to reach. Requirements planning then brings those levels together with sales orders, forecasts and safety stock, and suggests the purchase orders, work orders and transfers to raise.

That calculation still depends on people. A forecast built from sales history can't know about the large order that won't repeat, the customer who has moved to another supplier or the product being phased out next quarter. Lead times and order settings need someone who notices when a supplier's deliveries change. SYSPRO's own guidance points the same way: give the most valuable items the closest attention and let the rest run on the standard calculation. That's sound advice whichever route you choose, and it's where the question of help comes in.

Key takeaway: Before adding anything, find out which of SYSPRO's planning functions your business already uses, and when its settings were last reviewed.

Four routes to inventory planning help

Each of these works well for some businesses, and many use two together. We're a SYSPRO partner and we make planning software, so we see two of these routes from the inside. Our advice is the same either way: choose the mix your team can keep up.

Your own planner

Your planner owns the monthly review, keeps the settings up to date and decides what happens with each shortage or surplus. Because they sit in the same building as sales, purchasing and production, they hear about the large order, the supplier that's struggling or the product being phased out long before it shows up in the sales history.

That closeness is the strength of this route, and it's hard to replace. IMD researchers Ralf Seifert and Richard Markoff, writing about outside planning services, point out that market intelligence covers "customer or consumer behavior, growth, and expansion plans", and that "it will be difficult for an outside firm to have all necessary information". A planner inside the business has most of that by default.

The same researchers are honest about the difficulty as well, "Finding, training, and retaining talented demand planners is challenging, particularly in low-unemployment cycles." The role also tends to collect knowledge in one head. When the planner is on leave, or leaves, the business can find that nobody else knows why a setting is what it is. And planning time is easy to lose to the day's urgent work, because the monthly review never feels as pressing as the late delivery.

This route works best when the planner has protected time each month, training in the planning functions of your SYSPRO, a manager who backs their decisions, and a second person who understands the routine well enough to cover.

Questions to ask yourself:

  • If our planner were away for a month, who would run the review?
  • Is planning time set aside, or does it happen when the floor is quiet?
  • Does the planner know what each planning setting in our SYSPRO does, and why it's set the way it is?

Your SYSPRO partner

A SYSPRO partner knows the system, and often knows how your company's SYSPRO was set up, including the choices made at implementation that still shape how your system plans. Partner help is usually shaped like a project with a clear gap to close: checking the data and settings, correcting the configuration, setting up planning functions you haven't used yet, training your team, or adjusting things after a new warehouse, a new product range or an upgrade.

The strength here is knowing what each setting does and how a change will ripple through the rest of the system. A planner may know that an item keeps running short; a partner can trace it to the lead time, the order policy or the warehouse setup behind it, and change it without disturbing anything else.

Partners differ in how much hands-on planning they do. Some focus on setup and training and leave the monthly decisions with you; others stay involved in the routine. Neither is better in itself. What matters is that you know which you're getting, and that the knowledge stays with your team when the work is done. A configuration nobody inside the business understands tends to drift back to where it started.

Questions to ask your partner:

  • What will you change, and how will we test it before it goes live?
  • Will you help with the monthly planning itself, or with setup and training?
  • Who looks after the settings once the work is done, and will our team understand why each one is set the way it is?

An outsourced planning service

Some providers take on part of the planning itself as a regular service, most often preparing the forecast or the replenishment recommendations each cycle. Seifert and Markoff describe the trend as "a progressive transfer of baseline demand planning to third-party service providers", and give a practical reason for it: "For many contexts, companies do not need a full-time demand planning headcount, or at least not a round number." A smaller business may need two days of skilled planning a month, not a full-time post.

The route fits best where planning is already organised in one place and the item data is in good order. The IMD researchers write that "having a centralized planning model greatly increases the attractivity of outsourcing demand planning", and that "ideally, the company would have a high level of data maturity, and master data management".

They are equally clear about the trade-offs. An outside firm "will only add friction to the information flow to planners", "it will be difficult to set up KPIs to monitor demand planning as a service performance level", and "companies lose some measure of control of this essential lever." They also note a human risk: "it will be very tempting to blame them for all supply chain ills." None of these rules the route out. They mean the arrangement has to be set up with care: decide exactly what the service prepares, keep the decisions inside the business, agree how the data reaches them and how often, and agree the measures before the first cycle.

Questions to ask a planning service:

  • Exactly what do you prepare each cycle, and what do we decide?
  • How does our data reach you, and how do your recommendations get back into SYSPRO?
  • How will we both know, after three months, whether it's working?

Planning software

Software adds calculation power and a consistent way of working across many items and warehouses, and SYSPRO users have several good options. Some work inside SYSPRO and others alongside it, passing data between the two. Ours is Tempo, which can be described as "Lancea Konsult's inventory planning and replenishment solution, built directly into SYSPRO as a native module" (see how Tempo works).

Software earns its place when the number of items, warehouses or demand patterns grows past what a person can review well by hand, or when your business has already made full use of SYSPRO's standard planning functions and wants a different method. Its strength is consistency: every item is calculated the same way every time, and the ones that need attention come to the top of the list.

What software can't do is own the decisions. It needs someone who reviews its recommendations, good data to work from (accurate lead times, clean item records, enough history) and time at the start for setup and training. The surest test of any planning software is to run it on your own items and your own SYSPRO data, and compare the result with what you do today: stock, service to customers and the planner's time, not the forecast alone.

Questions to ask about any planning software:

  • Does it work inside SYSPRO or alongside it, and how do its recommendations become orders?
  • Can we test it on our own items and data before we commit?
  • What will it need from our team each month?

Which route fits

  • Your own planner fits when decisions depend on close, daily knowledge of customers, suppliers and production.
  • Your SYSPRO partner fits when there's a clear gap in setup, settings or skills to close.
  • An outsourced service fits when you need specialist planning time but not a full-time post, and your data is in good order.
  • Planning software fits when the number of items and locations outgrows careful review by hand.

Many businesses combine them: a planner who owns the decisions, a partner who keeps the settings sound, and software that does the calculations.

What good help looks like, whichever route you take

The best planning help starts with what you already have. It looks at your stock, your history and your lead times, and at what your SYSPRO is already set up to do, before it suggests anything new. It agrees up front which measures matter, such as service to customers and stock value, and records where they stand today, so everyone can see whether things are improving.

Good help also spends its time where it counts. The most valuable and most critical items get the closest attention, and the rest run on well-set rules that are checked from time to time. It explains every recommendation, so your team understands why a setting changed and feels free to say no. And it runs to a rhythm, a monthly review with exceptions handled in between, because settings that were right last year drift as demand and supply move.

Whichever route you take, someone in your business still needs to own the planning decisions. Good help makes that person's job easier.
A useful question for anyone offering help: what will my team be able to do on its own in six months?

Where to start

When did someone last check the lead times and safety stock settings in your SYSPRO? If that answer takes a while to find, it's a good first conversation to have, with your own team, your partner or a planning specialist. Perhaps the settings are fine, in which case the time is better spent elsewhere.

If you'd like to talk it through, we're happy to look at what SYSPRO is already doing for you and where help would make the most difference. Would it help to start there? Talk to the Lancea team.

Sources

  • Bureau for Economic Research (2026). Absa Purchasing Managers' Index, October 2026. https://www.ber.ac.za/Documents/Download/f6a83e2c-5cd5-4fa2-817e-d7ed68b0560d (checked 2026-11-12)
  • Seifert, R. and Markoff, R. (2023). Planning as a service: short-term gimmick or emerging strategy? IMD, 25 September 2023. https://www.imd.org/ibyimd/supply-chain/planning-as-a-service-short-term-gimmick-or-emerging-strategy/ (checked 2026-11-12 and 2026-11-16)
  • SYSPRO. Inventory Planning. https://www.syspro.com/product/inventory-planning/ (checked 2026-11-12)
  • SYSPRO. Material Requirements Planning. https://www.syspro.com/product/material-requirements-planning/ (checked 2026-11-12)
  • SYSPRO help: inventory optimisation and inventory forecasting overviews (checked 2026-11-12; URLs in the raw research file, not linked because they are version-specific)
  • Lancea Konsult. Tempo inventory planning software. /solutions/tempo-inventory (checked 2026-11-12)

Frequently asked questions

About this article

Demand forecasting estimates how much of each item customers are likely to want. Demand planning is the wider process of checking that estimate and agreeing the number the business plans to. Inventory planning turns the agreed demand into stock decisions: how much to hold, where, and when and how much to reorder.

Running SYSPRO and want a second opinion?

Talk to the Lancea Konsult team about your environment.

Talk to an Expert