← Back to articles

SYSPRO ERP

The inventory review that keeps slipping: inventory control as a monthly routine

19 November 2026

The inventory review that keeps slipping: inventory control as a monthly routine

The monthly inventory control review is in the calendar. Then a supplier misses a delivery, a large order lands early, and the review moves to next week. By the time it happens, the month has turned and the list of things to look at has grown.

Does that sound familiar? In our experience it's one of the most useful meetings an operations team can hold, and one of the first to move when the week gets busy. This article looks at why that happens, and at how to set up inventory control as a routine that holds, using functions SYSPRO already has.

What inventory control means

Inventory control (or stock control, as many people call it) is the ongoing work of keeping stock records accurate, keeping stock where it should be, and checking that the settings behind replenishment still fit the business. It sits inside the wider job of inventory management, which also covers planning what to buy, how much and when.

A year-end stock take gives an accurate picture on one day. Inventory control keeps that picture accurate between counts, so that orders and promises to customers start from the right numbers.

Why the inventory review keeps slipping

We believe the review slips for two reasons.

The first is preparation. Before anyone can decide anything, someone has to gather the count differences, the stock adjustments, the items running low, the slow movers and the late supplier orders, often from several reports, and shape them into something a meeting can work through. That takes hours, and when the floor is busy it's the first task to give way. Without the information in front of them, the people in the room have nothing to decide on, so the meeting moves.

The second is that the picture keeps changing. Stock moves every day. Information put together on Monday can be out of date by Thursday, and when the numbers in the room differ from what people saw on the floor that morning, the meeting turns into a discussion about whose numbers are right. Headline totals don't settle it either: as we wrote in an earlier article on inventory visibility, an overall view can look fine while one item is about to run out and another is sitting on months of cover.

Quieter things slip with it. Priorities drift, actions agreed last month go unchecked, and replenishment settings that were right a year ago carry on unchanged because nobody had the time to look at them.

When preparing the information takes days and the picture changes daily, the review is the easiest meeting in the month to move.

Count a little, often: cycle counting by value

The annual stock take has a clear purpose: an accurate count on one day that the year-end figures can rely on. It also has a cost. In its guide to best practice in physical counts, the US Government Accountability Office found that the leading locations it studied that ran full wall-to-wall counts shut their warehouses while the count took place.

Cycle counting spreads that work across the year. A portion of the stock is counted every day, week or month, and the locations in the GAO study that worked this way kept stock moving while they counted, relying on other controls in the meantime.

Value decides which portion to count, and how often. One location in the GAO study ranked its stock into four groups by value and activity, and counted the top group four times a year, the next three times, then twice and once. That was one site's policy rather than a standard, and it could be a sensible pattern to start from. The items that tie up the most money, or move the most, are where an error costs the most, so they earn the most frequent count.

Many routines also stop at the correction and don't record why each count was wrong. The GAO found that identifying the causes of differences helps reveal weaknesses in the controls behind them, and the leading locations it studied used, on average, 22 codes to record those causes. Over a few months, those reasons show where in the process the errors come from, which is what lets a team stop them happening.

Key takeaway: Count the stock that matters most, most often, and keep a record of why each difference happened.

Why record accuracy is worth the effort

Kang and Gershwin, researchers at MIT, looked at how accurate stock records are in practice in a 2004 working paper. In one retailer's stores, only about half of the items had a record that matched the shelf exactly (51%), rising to 76% when a record within five units of the shelf was counted as accurate.

They then modelled what a small, unnoticed loss does over time. With stock loss as small as 1% of average demand, the error building up in the records was enough to disrupt replenishment, and 17% of shoppers' demand was lost to empty shelves. That figure comes from a simulation in a retail setting, not a measurement in a factory, but the mechanism carries over. The system keeps reordering against a number that is no longer true, so the error grows instead of correcting itself.

We haven't found published figures for South African manufacturers. Closer to home, it's worth asking whether your team trusts the on-hand quantity in SYSPRO enough to promise a customer from it. The answer usually tells you how much the counts are worth.

A monthly inventory control review that holds

Counting keeps the records honest. The monthly review is where the team decides what to do about what the counts and reports show, and four things make the difference between a review that holds and one that keeps moving.

The first is a fixed date. A meeting that's always on the second Tuesday of the month, booked for the whole year, is harder to move than one that has to be found in everyone's diary each time. People plan around it, and the work that feeds it gets planned around it too.

The second is information prepared before the meeting, by someone whose job it is. It goes out a day or two ahead, so people arrive having seen it and the meeting is spent on decisions rather than on reading. Keeping the same few views every month lets trends show: how accurate the counts were and why the differences happened, the items below their safety level, the slow movers and the supplier orders running late. If the meeting itself has to move, the information should still go out on time, because people can act on much of it without waiting for the room.

The third is the right people. The review needs whoever can decide on stock: someone from planning or buying, someone from the warehouse who knows what the counts found, and someone from finance who sees the value tied up. If a decision needs a person who isn't there, the action waits another month.

The fourth is an action list that carries over. Each action has an owner and a date, and every review starts with last month's list before anything new is raised. It's the surest way to turn a decision in the meeting into something that gets done.

Before each review

  • The date is booked for the year.
  • The information goes out two days ahead: count accuracy and the reasons for differences, items below their safety level, slow movers, late supplier orders.
  • Planning or buying, the warehouse and finance are in the room.
  • Last month's actions come first.

How to run inventory control in SYSPRO

SYSPRO already supports each part of this routine. Its cycle counting lets you count part of the warehouse at set intervals while the rest of the business carries on: you capture what was counted, review the differences for each stock code, and then confirm them. You can set a variance percentage, and when a difference goes over it, SYSPRO asks for a recount before anything is posted, so the large errors get a second look. For a full stock take, stock codes can be selected by ABC class, and SYSPRO takes a snapshot of the selected stock at the moment it's selected. Over time, the cycle count results also give a measure of stock accuracy across the warehouse, which is a useful figure for the monthly review to track.

Much of the information for the review can come from SYSPRO's standard reports. If you use Tempo, the inventory planning software we built for SYSPRO, its dashboards show planners the stock at risk of running out and the excess stock that could be freed, which covers part of it. The settings side of inventory control, such as buffers and reorder levels, is covered in our article on smart buffer planning.

There's a year-end reason to keep records accurate as well. SARS taxes the stock on hand at the end of each year of assessment, and its Interpretation Note 140 (October 2025) makes clear that a business claiming a drop in that stock's value has to prove the damage and its effect on the value. The reasons for count differences, recorded through the year, give finance something to work from. For anything beyond that, speak to your tax adviser or auditor.

If accuracy has been drifting for a while, our article on signs your ERP needs a check-up looks at one common cause: business rules that changed without the system being set up again.

Where to start

Pick next month's review date today and book it for the year. Choose the twenty items that tie up the most value and count them this month. Agree who prepares the information, and send it out before the meeting.

Whether you'd like help planning the routine or only want the system set up to support it, we'd be glad to talk. Get in touch with the Lancea team.

Sources

  • US Government Accountability Office (2002). Executive Guide: Best Practices in Achieving Consistent, Accurate Physical Counts of Inventory and Related Property, GAO-02-447G. https://www.govinfo.gov/content/pkg/GAOREPORTS-GAO-02-447G/html/GAOREPORTS-GAO-02-447G.htm (opened 2026-11-12)
  • Kang, Y. and Gershwin, S. B. (2004). Information Inaccuracy in Inventory Systems: Stock Loss and Stockout. Working paper, MIT. http://web.mit.edu/manuf-sys/www/oldcell1/papers/kang-gershwin-autoid04.pdf (opened 2026-11-12)
  • SYSPRO help: cycle counts overview and stock take selection, help.syspro.com (opened 2026-11-12; described in general terms, no version)
  • SARS (2025). Interpretation Note 140, Diminution in the value of closing stock, 16 October 2025. https://www.sars.gov.za/wp-content/uploads/Legal/Notes/Legal-IntR-IN-140-Diminution-in-the-value-of-closing-stock.pdf (opened 2026-11-12)
  • Lancea Konsult: "Stockouts and overstocks: the hidden cost of poor inventory planning" (Tempo dashboard wording) and the inventory visibility article linked above (both opened 2026-11-12)

Frequently asked questions

About this article

The ongoing work of keeping stock records accurate, keeping stock where it should be, and checking that the settings that drive replenishment still fit the business. It runs all year, between the counts.

Running SYSPRO and want a second opinion?

Talk to the Lancea Konsult team about your environment.

Talk to an Expert